| Products |
WINDEV
10, WEBDEV 10, WINDEV Mobile 10 |
| Required
Version |
100062f |
| Date |
November
22, 2006 |
Caution: The modules below are common to WINDEV
10, WEBDEV 10 and WINDEV Mobile 10. There is no need to download them
for each product. All the products installed on your computer will be upgraded
at the same time.
How do I install the upgrade?
| 1. |
WinDev 10 and/or WebDev 10 and/or WinDev Mobile 10 must be installed
on your computer. |
| 2. |
Download the relevant modules in the same directory of your computer
(select "Save on disk"). |
| 3. |
Once the modules have been downloaded, run the programs found
in your download directory. We strongly advise you to start with the 'environment'
module.
WinDev, WebDev and WinDev Mobile must not be used on your computer during the
setup. |
| 4. |
Follow the instructions. |
| |
*: common to WinDev and WebDev only |
|
When the maximum number of simultaneous downloads has been reached, an error message
is displayed ("Unable to display page"), preventing you from downloading
a copy. Please retry later. If you still can't download a copy after a few attempts,
contact our Free Technical Support.
WINDEV is intended for professional developers. In most cases, professional developers
have access to a fast Internet connection (ADSL, etc.) Therefore, downloading
a copy doesn't generate any additional cost and can be performed very efficiently.
However, if you don't have fast Internet access (specific geographical areas,
firewall or other reason) and if you don't want to download a copy via modem,
send an e-mail to our Free
Technical Support. Specify your serial number, your Internet connection speed
and your personal information (name and address). We will send you a CD containing
a copy of the updated version within a few days.
|
